Pressure washing
- House and stucco washing, low pressure with a cleaning solution
- Driveways, sidewalks and curbs
- Pavers and pool decks
- Lanais and screen enclosures
- Fences and decks before staining
Service · Washing & epoxy floors
In short
Stucco, paint and screens get a low-pressure soft wash with a cleaning solution. Concrete gets higher pressure. Epoxy floors start with grinding the concrete so the coating can grip, then a base coat, optional decorative flake and a clear top coat.
Key facts
Pressure by surface
Too much pressure etches stucco, strips paint and tears screens. This is how we match the method to the surface.
| Surface | Method | Why |
|---|---|---|
| Stucco and painted walls | Soft wash: low pressure with a cleaning solution | Cleans mildew and algae without etching stucco or lifting paint |
| Screens and lanai cages | Low pressure, gentle rinse | Screens tear and frames scratch under high pressure |
| Wood decks and fences | Low pressure with a wood cleaner | Lifts gray fibers without gouging the boards before stain |
| Pavers and pool decks | Moderate pressure | Lifts dirt and algae without blowing out the joint sand |
| Driveways and sidewalks | High pressure with a surface cleaner | Concrete can take it, and stains need it |
How an epoxy floor goes
Epoxy is only as good as the concrete under it, so prep is most of the job.
Oil and old coatings removed, then the concrete is ground so the epoxy can grip.
Cracks and pits filled and leveled.
The color coat goes down, with decorative flake broadcast in if you chose it.
A protective top coat for shine, grip and easy cleaning.
Questions
Not when the pressure matches the surface. Stucco and painted walls get a low-pressure wash with a cleaning solution. High pressure is reserved for concrete.
Yes. Every exterior paint job starts with a wash, and we also do house, driveway and pool deck washing on its own.
It depends on the product and the weather. You get exact walk-on and drive-on times for your floor before we leave.
Covered lanais and patios, yes, with a product suited to the space. Floors in full sun need a UV-stable top coat, which we cover at the estimate.
Free estimate
Tell us the surfaces. We match the method to each one and price it at your property.