How often should a deck be re-stained in Florida?
Decks in full sun usually need fresh stain sooner than shaded ones. We check yours at the estimate and tell you what to expect for that exposure.
Service · Wood staining
In short
Florida sun grays bare wood and breaks down old stain. TrueTone strips or cleans the surface, sands and repairs it, then applies a transparent, semi-transparent or solid stain chosen for how much grain you want to see.

Key facts
What we stain
Boards, stairs, skirts and benches, cleaned and re-stained evenly.
Front doors and sidelights stripped and refinished to a rich, even tone.
Privacy fences and gates stained to resist sun and rain.
Overhead wood that bakes in the sun all day.
Lanai and porch ceilings refreshed without the drips.
The slow, careful work that shows on every deck.
Choosing a stain
Opacity decides how much of the wood shows through and how often it needs refreshing.
Shows all of the grain and color of the wood. Best on newer wood in good shape. Needs refreshing most often.
Adds color while the grain still shows through. The most common choice for decks and fences.
Covers like paint but lets the texture show. Good for older, weathered or mismatched wood.
How a stain job goes
Old, failing stain and gray, weathered fibers come off first.
Rough spots sanded, popped nails set, loose boards secured.
Applied evenly, end grain included, in the opacity you picked.
Paint or stain?
| Stain | Paint | |
|---|---|---|
| How it wears | Soaks in and fades gradually | Forms a film that can peel on horizontal boards |
| Upkeep | Clean and re-coat | Scrape and sand failing areas before repainting |
| Best for | Deck boards, stairs, fences | Railings, trim and vertical surfaces in a solid color |
Staining work



Questions
Decks in full sun usually need fresh stain sooner than shaded ones. We check yours at the estimate and tell you what to expect for that exposure.
For most decks, stain. It soaks in and wears gradually, so upkeep is simpler. Paint forms a film that can peel on horizontal boards.
Yes. Wood and stainable fiberglass doors can be stripped and refinished. We look at yours and recommend the right product.
Usually not. New treated lumber often needs time to dry out first. We can test the wood and tell you when it is ready.
Free estimate
We check the wood, recommend an opacity and price the job at your property.